Logo Lites
  Turn Signals Home  











E-commerce enabled by Creative Cart Shopping Cart Services

Home  ·  Contact  ·  About  ·  Order Info  ·  Picture Gallery Shopping Cart

Logo Lites® Model A Ford LED Turn Signals
Replacement Parts

Which Generation Do You Have?

LogoLites Model A Ford LED Turn Signals have been manufactured for many years. Naturally, the product has evolved over time. The spare parts compatible with your kit vary based on the product generation of your turn signal kit. Some parts are universal while others are not. Identify your kit type based on the following table, then scroll down to find the parts that match your kit.

Generation 3, (2012)

  • 6 Pin connector
  • Better visual appearance
  • Larger, more visible buttons
  • Smaller & Lighter with improved magnet to weight ratio
  • No awkward chassis tab
  • Paintable
  • Overheat protection
 

Generation 2, (2006)

  • 5 Pin connector
  • Illuminated push button switches replace easily broken toggle switch
  • Removed hazard switch
 

Generation 1, (1998)

  • 5 Pin connector
  • Original units had a quiet "click". Later generation 1 units had an electronic "cricket" sound. The cricket can be heard by most people even around a very noisy A!
  • 6V or 12V positive or negative ground with plug and play ease.
LogoLites Gen3 Controller LogoLites Gen2 Controller LogoLites Gen1 Controller

Replacement Parts

LED Replacement Unit (PN 236-601) is ideal if the unthinkable happens and one of your original LED units is broken. These LED units will ONLY work with a Logo Lites Model A Ford Turn Signal Controller.

$24.95 US Dollars

GEN 3
GEN 2
GEN 1
236-601

Logo Lites Screwdriver (PN 015-0001) has a 0.100" width blade. This screwdriver works with the replacement harness connectors.

$2.95 US Dollars

GEN 3
GEN 2
GEN 1
screwdriver

Replacement harness connector (PN 012-1000) for 1st and 2nd generation controllers. Requires a screwdriver with a 0.100" width blade.

$5.95 US Dollars

GEN 2
GEN 1
5 Pin Connector

Replacement harness connector (PN 012-1003) for 3rd generation controllers. Requires a screwdriver with a 0.100" width blade.

$6.95 US Dollars

GEN 3
6 Pin Connector

Turn Signal Controller (PN 236-604) allows you to upgrade to a NEW controller without buying an entire kit. This controller ONLY works with our Logo Lites LED units.

IMPORTANT: If you have a 1st or 2nd generation system, you will also need to purchase the 3rd generation 6 pin, replacement harness connector to use this new controller with your system.

$119.95 US Dollars

GEN 3
GEN 2
GEN 1
LogoLites Gen3 Controller

Replacement Lens (PN 009-0000) Grote GL45253 Amber Marker Lamp.

IMPORTANT: The lens and base are compatible with the LogoLites Turn Signal Assemblies in your kit, but the bulb is conventional incandescent technology and is not compatible. Use the plastic part(s) you need and give the unused parts to a friend.

$5.95 US Dollars

GEN 3
GEN 2
GEN 1
236-607

To order a complete Turn Signal Kit for your car click here.


Please send comments on this page to our Webmaster
"Logo Lites" and the Logo Lites logo are a registered trademarks of Creative Connections, Inc.
LogoLites.com is a trademark of Creative Connections, Inc.
Copyright 1998-2012, Creative Connections, Inc.